CALL US : +8618650901698

Manual Call point 2-wire Fire alarm system

  • Manual Call point 2-wire Fire alarm system

Manual Call point 2-wire Fire alarm system

Price :
$10.00  $9.00
Add to Cart:
  • Model: SB-116
  • Shipping Weight: 0.4kgs
  • 95 Units in Stock
  • Manufactured by: HST fire alarm

DESCRIPTION

SB-116 Manual call point 2-wire Operates by Advanced MCU Expert Algorithm Software.
The conventional manual call point is designed for fire alarm systems and security alarm systems
It is with pull down plate for safe and easy press to call at emergency condition and easy to restore after the alarm.
It can be reset by using the key to open the case without breaking the glass.
It is compatible with all the conventional fire alarm control panel.
Each fire zone should have at least one manual fire alarm button. The distance from any location in a fire zone to the nearest manual fire alarm button should not be more than 30m.
The manual fire alarm button is set at the entrance and exit of public places activity rooms.

The specific places should have the fire manual call point arese are follows: hall, hall, entrance and exit of main public places for activity;

Other places should have fire manual call point are: major entrances and exits of restaurants, multi-functional halls, etc., main passageways, halls and other places that are often passed by people, and workplaces for duty personnel.
Acousto-optic alarm or alarm bell as an alarm device is installed above the manual alarm.

470 Ohm resistance
Easy surface mounting base included.

All wiring must be installed in compliance with the National electrical code, applicable state and local codes and any special requirements of the local authority having jurisdiction.
Specification:
Dimension:140mm*105mm
Height: 45mm
Weight: 220g
Operation temperature range: -10 C to 50 C
Operating Humidity range: 10% to 93% relative humidity, non condensing
Latching alarm: Reset by momentary power interruption
System voltage (nominal): 24VDC (9V-28VDC)
Standby current: 60uA @24VDC
Alarm current: 10-30 mA @24VDC