Alarm System Advanced technology 2 beams Solar Powered Wireless Active Infrared Detector used for perimeter, fence etc.
Light Wall Transmitting Terminal 1 piece
Light Wall Receiving Terminal 1 piece
Accessories for installation 1 set
User Manual 1 copy
Learn to install the solar wireless beam system at
how to install alarm
It is with featuers as below:
1. Solar-powered, no external power cord required.
2. Radio Frequency (RF) Hopping & FM Signal Alarm, no external signal wire required.
3. Radio Frequency (RF) Hopping & FM Signal Alarm, no wireless signal interference,no reception error, no false alarm.
4. Adoption of data coding scheme ensures no coincident code among 60000 pairs of light walls.
5. Immune to strong light interference, with interference indication function.
6. Equipped with the functions of self-check and reporting to the host.
7. Equipped with the function of reporting to the host about any offset due to such causesas wind blowing after installation.
Contact us if you have any question. Shopping guide at
how to shop alarm
Specification:
1. Working voltage：3.3V
2. Battery Type：LiFePO4li-ion battery
3. Battery capacity：transmitting terminal 500mAh, receiving terminal 1000mAh
4. Static working current：transmitting terminal≤0.5mA, receiving terminal≤0.5mA
5. Infrared light frequency：secondary modulation and coding on the basis of 38KHz
6. Infrared light wavelength：940nm±20nm
7. Number of infrared beams：2 beams
8. Wireless transmitting frequency：433MHz FSK+FHSS
9. Infrared distance：60m
10. Wireless transmitting distance：1km
11. Solar electrical panel output current：≥2mA at an illumination level of 1800Lx
(Note：outdoor illumination intensity in rainy days is about 2000Lx)
12. Working environment temperature range：-30℃~70℃
13. Maximum alarm times in 24 hours：≤50 times
14. Overall dimension：265×84×45（mm）
It can work with HB-MFR wireless to wird signal adapter with 4 wired input zones.
It can work with HB-BJQ-560 GSM alarm control panel which can receive 560 pairs solar beams
