CALL US : +8618650901698

Gas Detector Wired Alarm System

  • Gas Detector Wired Alarm System

Gas Detector Wired Alarm System

Price :
Add to Cart:
  • Model: HM-701NVC-AC
  • Shipping Weight: 0.4kgs
  • 20 Units in Stock


The detector can work with any wired alarm control panel and drives solenoid valve to shut off gas tube.
The product is wall mounted gas detector with high stability. It is used for detecting leaking gas. Advanced semiconductor sensor is adopted to ensure high stability and long life. It is convenient for mounting. The product is suitable for the safety of residential house, villas, hotels, markets, boarding house and hazardous areas indoors and outdoors where combustible gas is produced.
Main features:
1.high sensitivity and excellent reliability with highest level of safety assurance.
2.Auto reset after alarm.
3.Microprocessor Control technology.
4.Auto detect sensor failure.
5.Can detect natural gas and LPG etc. flammable gas which is lighter than air or heavier than air.
6.It will alarm with sound and led light and trigger the control panel to send alarm information when it is wired to master control panel.
7.It is equipped with electric valve to shut off gas when gas is detected.
1.Operation Voltage: AC100V ~ 240V
2.Static Current: <=90mA, (<=30mA at low power consumption status)
3.Alarm Current: <=100mA (<=40mA at low power consumption status)
4.Rated Power: 2.5W
5.Warm-up Time: about 180s
6.Alarm Level: 10% LEL
7.Alarm Indicator: red LED flash
8.Failure Indicator: yellow LED on & beeper long-buzz
9.Sound Level: >=85dB/m
10.Operation Temperature: -10 C-+50 C
11.Environment Humidity: <=95% RH (no congelation)
12.Installation way: Wall mounted
13.Alarm Output: relay output and sound & flash alarm
14.Outline Size: 115*72*41mm

To test the installed detector while using independently or in network, you can give some gas around in distance of 5cm to the gas convection holes by using un-ignition lighter. Testing frequency may result in reducing the sensitivity of the detector.