6 types home security solutions

You are welcome to share your opinion or experience of alarm installation, alarm system usage with us.
Post Reply
vedard
Posts: 235
Joined: Wed Mar 05, 2014 8:17 am

6 types home security solutions

Post by vedard » Wed Jul 18, 2018 12:49 pm

How to make home security solutions according to individual needs and budget? Below we will give an example to explain it. The house is with 3 bed rooms, 2 bath rooms, 1 kitchen room, 1 study room and 2 balcony.
Home security solution according to budget
Image
The principle of making home security solution.
1.Plan and make external security firstly. In security alarm industry, it is perimeter security zones. The security protection areas are fence, wall, gate and house entrances including door, windows and balcony. The connection areas between the upper and lower floors, between house and neighbor’s house.
2.Then plan and make internal security. In security alarm industry, it is interior zones and fire zones. The security protection areas are aisle, hall, living room, kitchen room, bed room, bath room.
3.The alarm control panel installing principle:
A.Install it at place with telephone interface and hide it. Do not install it near the door or where theft can easy find and destroy it.
B.If the alarm control panel can not be installed at hidden place, then a PIR motion sensor should be installed to monitor the alarm control panel.
C.It is best to install the siren strobe outdoor and far from the alarm control panel.
D.If the siren strobe can not be installed outdoor, it is best to use wireless siren strobe and avoid theft finding the alarm control panel.
Step 1: Define the protection range according to the house situation.
From below drawing, we can know the most easy to be invaded place is two balconies, then is the out door. And kitchen room windows, study room windows cause these rooms are always vacant at night time and can be entrance of theft. Bath room, child room, main bed room are listed as protection areas with priority code.
All protection areas are listed with priority code from 10 to 1 as below.
Step 2: Define defense zones and defense way, equipment for each zone.
After protection areas and zone is defined, the defense equipment quantity and types should be defined according to the community security environment and family environment, behavior. The above home security solution design for example, we can use different equipment for different level defense. The equipment can be added or deducted according to budget and needs.
Home intrusion places and alarm type
1.Simple type installation:
Image
With lowest budget and good security environment, we make simple type installation. Only gate No.7, balconies No.9 and No.10, kitchen room No.6, study room No.5 are defensed. Wireless door magnetism contact is used for gate No.7, kitchen room No.6 and study room No.5. PIR motion sensor is used for living room and bedroom to against intrusion from two balconies No.9 and No.10.
The alarm system used is 1pc PIR motion sensor, 3 pcs door or windows open contact, one set alarm control panel with 1 PIR, 1 door contact, 2 keypad, remote controller.
The functions of the simple type alarm system.
A.When the gate or kitchen room window, study room window is opened, (door or window is leaving more than 1 cm from the door frame or window frame) or someone is entering into living room or bedroom from the balcony, the alarm system will go off and siren strobe makes sounder and lighting for warning.
B.Backup battery is built-in and can work for 8-16 hours at AC off time.
C.PIR motion sensor is used for zone 9 living room and home arm can be set when someone is at home. So, the living room PIR will not trigger alarm when someone is at home.
D.If no one is at home, away home arm should be set and intrusion is detected at living room, the alarm goes off.

The cons: When magnetic contact is used for windows security, the windows can not be opened even at summer time.
basic home security installation solution
2.Basic type installation:
Image
Use wireless door windows magnetic switch for all doors and windows. Use 1 PIR motion sensor for addition of living room security protection.
The functions of the basic type alarm system.
A.When the gate or kitchen room window, study room window, bathroom window, child room window is opened, (door or window is leaving more than 1 cm from the door frame or window frame) or someone is entering into living room or bedroom from the balcony, the alarm system will go off and siren strobe makes sounder and lighting for warning.
B. Backup battery is built-in and can work for 8-16 hours at AC off time.
C. PIR motion sensor is used for zone 9 living room and home arm can be set when someone is at home. So, the living room PIR will not trigger alarm when someone is at home.
D. If no one is at home, away home arm should be set and intrusion is detected at living room, the alarm goes off.

Cons: When magnetic contact is used for windows security, the windows can not be opened even at summer time. When someone is at home, home arm should be set.
improved home security solution
3.Practical type installation:
Image
Cause the basic type alarm system using windows contact for windows protection and the windows can not be opened at arm status, the curtain PIR is used to replace windows contact. The curtain PIR is with direction recognition and alarm goes off if theft entering from outdoor. The alarm will not go off if home owners is walking at home.
Cons: The balcony security protection is not enough. The theft can enter into balcony without alarm going off. It alarms until theft goes into the house.
plan home security solution with guide
4.High grade type installation:
Image
Use infrared fence as balcony and windows intrusion prevention security equipment. The infrared fence is installed outdoor and can stop intrusion outdoor. Smoke detectors and gas leakage sensors are used as well for fire prevention.
Solar power wireless infrared fence can be used. It is easy to install and there is wireless to wired transceiver for connection with any third party alarm control panel.
Smoke alarm and gas alarm should be set as 24 hours zone and not controlled by arm disarm setting.
Home security solution with perimeter security
5.Complete type installation:
Image
With infrared fence installed outdoor for windows and door entrance prevention. And add outdoor PIR detector as well at balcony to ensure the alarm going off when the theft is at balcony. Add wireless siren strobe for warning and neighbor notice. So, home is more secured.
Home security with fire prevention
6.Thorough security solution with smart home
Image
Smart home house appliance switch is added to complete type installation alarm system. The house appliance such as air conditioner, electric cooker, electric heater can be remote turned on or turned off by mobile phone, remote, smart home app or telephone calling.
DIY home security like a profession

vedard
Posts: 235
Joined: Wed Mar 05, 2014 8:17 am

Re: 6 types home security solutions

Post by vedard » Thu Jul 19, 2018 8:28 am

You can add more security component according to your needs to the security solution. For example, wireless panic button can be added for children, elders needs.

Ron
Posts: 13
Joined: Tue Jun 05, 2018 2:20 am

Re: 6 types home security solutions

Post by Ron » Mon Aug 06, 2018 3:27 am

vedard wrote:
Thu Jul 19, 2018 8:28 am
You can add more security component according to your needs to the security solution. For example, wireless panic button can be added for children, elders needs.
Outdoor installing wide angle PIR, curtain PIR or AIR infrared beam, infrared grating, microwave beam should be used for higher defence level. You can check the equipment at perimeter security catalog.

vedard
Posts: 235
Joined: Wed Mar 05, 2014 8:17 am

5 types security detectors for door windows protection

Post by vedard » Mon Aug 06, 2018 1:23 pm

Door and windows are the easiest intrusion way. If strong and safe door with lock is used, then windows will be the easiest intrusion way. We need to pay more attention on security of door and windows.
What security equipment can we use for door and windows protection? There are 5 types security detectors for door or windows intrusion alert. The security equipment should be installed according to family members' living habit, family budget, environment and installing hardness level.
1. Wireless or wired door window magnetism contact. These contacts are the simplest and lowest cost security kits for door windows safety. But the protected door and windows should be closed at arm status. It is not suitable for the family to have people always in the house.
2. Wide angle outdoor PIR motion sensor. Outdoor PIR can be installed to monitor the door and windows intrusion area with 12m *12m space. But it may cause false alarm if someone pass the area without intrusion intention. So, it can be used for private yard, courtyard only.
3. Curtain PIR indoor or outdoor installation. Curtain PIR is designed for balcony, windows or door intrusion space monitor with detection area 2m *3m only. So, only the intrusion movement will be detected and alerted.
4. Wireless or wired infrared grating. Photoelectric infrared beam and grating is tranditional and secure technology for perimeter security. The transmission and receiver terminal keeps emitting and receiving invisible infrared light and if it is blocked, it triggers alarm. The beams can be installed on wall with fixing kits. Wireless beam is with solar power and totally no wiring needed.
5. Glass break sensor or vibration sensor. The break detector is installed near the windows or door and can sense glass breaking then trigger alarms. But it is suitable for indoor and quiet environment only. In noisy environment, it may cause false alarm.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests